Home » Listing Details
Top Websites
  1. Dynamics GP Help
    Over 5900 resources listed.
  2. Mark Polino's DynamicAccounting.net
    Over 5100 resources listed.
  3. Rose Business Solutions Blog New
    Over 2200 resources listed.
  4. Developing for Dynamics GP - By David Musgrave and the MS GP Dev Support Team
    Over 1100 resources listed.
  5. Mariano Gomez at The Dynamics GP Blogster
    Over 900 resources listed.
  6. Microsoft Dynamics Partner Community Blog
    Over 900 resources listed.
  7. Christina Phillips, Steve Endow & Lorren Zemke at Dynamics GP Land
    Over 700 resources listed.
  8. Mohammad Daoud's Dynamics GP Blog
    Over 600 resources listed.
  9. Vaidy Mohan at Dynamics GP - Learn & Discuss
    Over 500 resources listed.
  10. Inside Microsoft Dynamics GP Official Blog
    Over 500 resources listed.
  11. eOne Business Solutions Blog
    Over 400 resources listed.
  12. About Dynamics, Development and Life
    Over 300 resources listed.
  13. Frank Hamelly at GP2theMax
    Over 300 resources listed.
  14. Dynamics CPM
    Over 300 resources listed.
  15. BKD Dynamics GP Insights Blog
    Over 200 resources listed.
  16. Leslie Vail at Dynamics Confessor Blogspot
    Over 200 resources listed.
  17. Victoria Yudin's Dynamics GP Website
    Over 200 resources listed.
    Victoria Yudin
  18. Janakiram M.P. at DynamicsBlogger
    Over 100 resources listed.
  19. VS Tools Forum
    Over 100 resources listed.
    Your Resource for Visual Studio Tools for Dynamics GP
  20. Inside Microsoft Dynamics GP Official Blog
    Over 100 resources listed.
  21. US Dynamics GP Field Team Blog
    Over 100 resources listed.
  22. Catherine Eibner MBS Developer Evangelist
    Over 100 resources listed.
  23. Sivakumar Venkataraman at Interesting Findings & Knowledge Sharing
    Over 100 resources listed.
  24. Dynamics Small Business
    Over 100 resources listed.
  25. Belinda, The GP CSI
    Over 100 resources listed.

ID:9806
Title:Dex.ini Switches - Part 2
URL:http://dynamicsconfessions.blogspot.com/2009/01/dexini-switches-part-2.html
Description:I'm finally getting back to posting. Here's the second installment of the .ini switches. My favorites were posted with part 1, but I'm always on the lookout for more. I've got some for VBA and IM as well.

ADC Processor=TRUE
You will see this line in the Dex.ini file if you are using Manufacturing and have the checkbox marked in ADC Preferences. (dah!)

AdvLookups=FALSE
New Users created will NOT be granted access to the Alternate lookup windows in the SmartList dictionary and will instead be assigned the old ‘green bar’ lookup windows. Very useful if you want to use Dex and try to do a lookup.

AllowBCPTest=FALSE
Prevents utilities from running the BCP test.

AllowWrongDex=TRUE
Will allow Dynamics GP to launch with mis-matched versions of dexterity. DANGER, this is not such a good idea.

ApplicationName=name
Changes the name the runtime engine displays when it is launched. Without this setting the name “Dexterity Runtime” is displayed. With versions 9 and higher this doesn't display very long so it's hard to spot. Hardly worth the effort anymore. It used to be quite fun.

AutoDisplayUpdate=TRUE
Automatically redisplays the process monitor queue.

AutoInstallChunks=TRUE
Causes Dynamics to automatically include the *.cnk file not prompting the user for 'Add New Code' during launch.

BTInterface=NoLoad
This applied to the old Btrieve file handler (PSQL 2000) as to whether the interface would load when Dynamics was launched. Version 7.5 was the last version where PSQL could be used.

Buildphantom=TRUE
Allows creation of a Manufacturing Order for a Finished Good Phantom Item. Sounds spooky.

BuildSQLMessages=TRUE
This one will copy the Dexterity messages to a SQL table on next login and then it will set it back to FALSE. Once in a SQL table the messages can be used in stored procedures. The table is DYNAMICS.dbo.MESSAGES.

DebugFonts=TRUE
This setting causes Dexterity to generate a trace file named "debuglog.txt". This file lists the fonts that were considered and why particular fonts were chosen or rejected. This applies to Report Writer reports.

DebugRW=XXX
Where XXX equals the sum of the values you want to trace from below.

Value = Description
1 = QueryOK Specifies if the report will use a single query or not
2 = Sanscript Logs the run report statement as the Report Writer sees it
4 = RW Query Logs all API calls from RW to the Data Manager
8 = RW Setup If used with RW Run, logs all data returned by Data Manager
16 = RW Steps Logs internal RW steps in processing the report
32 = RW Run Logs all RW runtime calls to the Data Manager
64 = DM SQL Logs internal Data Manager structures and SQL Generation
256 = RW Frames Logs the beginning of each report frame
512 = Tab Delimited Logs output as tab delimited output

Output will appear in a log filed named DebugRW.txt next to the application dictionary.

Example: If you want to log if a report is using a query and the SanScript and SQL code used, then add the following line to your Dex.ini file:
DebugRW=67 (which is 1 + 2 + 64)

To help in trouble shooting problems related to the generation of reports, before printing a report you may choose to mark the Multi-Login Report option on the Report Definition window. This will force the system to perform individual table operations instead of creating a query. If you have the SQLLogSQLStmt = TRUE setting included in your DEX.INI. The individual select statements are then included in your DEXSQL.LOG file and can be analyzed to uncover any potential problems.

DebugUnknownFile=TRUE
Returns a Btrieve or Ctree error code to help track problems with table errors back in the day of Btrieve and Ctree. (version 7.5 and previous)

DexHelpPath=pathname
Path to the Dexterity help files. Consider using this if you want to 'share' help files. This defaults to the application folder on the local client.

Dictionary Version=xx.xx.xxxx
The current version of the Dynamics.dic file. Changing this value will not change the dictionary, but this value is updated when a service pack is installed.

DisplayTableErrors=TRUE, ALL or OPEN
To display an ID for an unknown table error when the Dexterity Database Management Subsystem encounters one. The ID that's displayed can be used to determine the cause of the error.
TRUE – Displays only unknown errors.
ALL – Displays all table errors except the two most common: “duplicate” and “not found”.
OPEN - Displays all table errors for an open operation.

That's all for now. Please let me know if there are any errors in any of the switches so I can be sure to correct the post.

Thanks for "listening"!

Leslie
Category:SUPPORT (TECHNICAL): Dex.ini Settings
Link Owner:
Date Added:June 17, 2010 05:09:59 AM
Number Hits:11
RatingsAverage rating: (0 votes)
Reviews

No Reviews Yet.

 
GPWindow.com

Thank you for your support for GPWindow. It helps us cover part of the hosting costs for GPWindow.